- How to Remove Lake Weeds
- How to Kill Weeds Between Cracks in Interlock
- Homemade Weed Killer That Does Not Kill Grass
- How to Hoe a Garden
- How to Kill Weeds in My Driveway
- How to Kill Weeds in Rock Driveways
- How to Kill Weeds in the Walkway
- How to Kill Weeds With a Tarp
- How to Keep Grass & Weeds Out of a Play Yard
- How to Remove Weeds From the Yard Without Killing the Grass
- How to Mix Sahara Grass Killer
- Definition of Weeding
- How to Clear Weeds Easily
- How to Remove Grass & Weeds Around Grape Plants
- How to Mix Glyphosate
- How to Stop Weeds From Growing in Concrete Slab Joints
- Homemade Solution for Killing Yard Weeds
- Homemade Weed Killer for Large Areas
- How to Kill Weeds Around Trees
- How to Farm With Plastic Weed Block
- How to Kill Grass & Weeds in Flowers
- Weed Control Cultural Methods
- How to Kill Lawn Weeds
- Weed Control Recipes
- Weeds That Take Over the Lawn
- Homemade Remedy for Killing Weeds
Weeds surrounding your dock make swimming and boating less enjoyable. They seem to get tangled in the propellers of boat motors and can take over your swimming area, if left unchecked. You must work throughout the summer months to keep a handle on the weeds, just like cutting your grass or plucking weeds from a garden. Use a few basic tools to create and maintain a weed-free lake.
Rake up unwanted debris during the spring to kick off the start of the swimming and boating season. This includes raking up any dead seaweed and sticks.
Cut the weeds using a weed cutter when they are about halfway to the surface of the water--usually in the first month of summer. Cutting weeds before they reach the surface is a preventative that prevents them from getting out of hand.
Rake up the cut-off weeds that float to the surface, guiding the cut weeds to the shoreline or dock, where you can collect and dispose of them. Let the weeds sit and dry for a few hours before disposing of them; this will make them much lighter and easier to carry.
Complete a second cutting and raking as necessary, depending on how fast the weeds grow. Keep an eye on the weeds so they don't extend further than halfway to the surface.
Repeat this process, starting in the spring of each season to maintain a weed-free shoreline.
Cut the weeds at the surface using a garden hoe. This is a temporary solution since the plant will regrow from the existing roots. Vigorous sweeping of the pavers can reduce the weed growth. Mechanical weed removal like this requires vigilance and repetitive efforts to be effective.
Spray the weeds with broad spectrum weed killing herbicide. Glysophate herbicides are effective on all plants. Limit this type of spray to areas where the chemicals won't wash into gardens or lawns. This will kill the weeds, but the dead plants remain in the cracks. Allow the herbicide to work until the plants are dead, then use a hoe to remove the plants.
Pour boiling water on the plants. A tea pot works well to heat the water and provides a spout for easy pouring. The boiling water kills the plants without the use of chemicals. Use a hoe to remove the plants. Boiling water may also kill seeds that are in the cracks of the bricks, working as a pre-emergent weed control system. It can also be used to control ants and other insects in the cracks.
Put on garden gloves before working with the corn gluten meal. Corn gluten meal will not harm grass in any way, but will keep weeds away.
Spread corn gluten meal over your lawn at a rate of 20 lbs. for every 1,000 square feet of space. Do this in the middle of April.
Water the area with your hose. Wet the corn gluten meal so that it is pushed down into the soil.
Wait for the corn gluten meal to dry. This means you want to choose a day to apply the corn gluten meal when no rain is expected.
Repeat these steps in mid-June and mid-September. No weeds will be able to germinate, leaving you with a lush green lawn.
Remove weeds while they are still small, before the roots have a chance to take hold. Begin cultivating the garden soon after planting; weeds hoed out at this point will die and not come back.
Keep the hoe sharp. Using a dull hoe is like trying to slice a tomato with a dull knife. Use a rasp or a metal file at a 45-degree angle to sharpen the hoe whenever needed.
Start at the beginning of a row and work your way methodically through the garden. If you hoe only part of the garden, begin the next day where you left off.
Hold the hoe the same way you would hold a broom. Starting at the base of the garden plant, use short motions pulling the hoe toward you.
Use the sharp edge of the hoe to disrupt the root of the plant. Run the blade edge just below the soil, chopping off the plants. Avoid damaging the garden plants, while cultivating as close as possible to the base of the plant.
Scratch the soil surface with the hoe, gently loosening the soil and uprooting small weeds. Leave the small weeds on the surface to die.
Pour boiling water on top of the weeds or into the cracks where the weeds are growing in your driveway. The hot water will kill the weeds by cooking the roots. Repeat on a daily basis until the weeds in your driveway die.
Spray vinegar onto the weeds in your driveway to kill them. The acetic acid in the vinegar will draw out the water in the weeds and cause them to dry up. Repeat on a daily basis until the weeds die. Although the top portion of the weed may die, this method may not always kill the root of the weed.
Spread some salt over the weeds in your driveway to kill them. The salt will prevent the weeds in your driveway from being able to absorb water and eventually kill them. Use a small amount of salt if you wish to only kill the weeds currently growing. Use a larger amount of salt if you want to prevent weeds from ever growing back in that area of the driveway.
Fill a spray bottle full of vinegar. Spray a generous amount of vinegar onto the weeds in your rock driveway that you would like to kill. As the vinegar soaks into the weeds, it will draw the moisture out and cause the weed to dry up and die. The stronger the acidity of the vinegar, the quicker it will kill the weeds.
Boil a pot of water and pour it over the weeds in your rock driveway. The hot water will cook the weeds and cause them to die. If the weeds do not die after the first application, repeat this process once a day until the weeds begin to die.
Put a small amount of salt at the base of each weed in your rock driveway that you would like to kill. After the salt absorbs into the soil, it will prevent the weeds from absorbing water and cause them to dry up and die.
Choose a sunny and preferably hot day to kill weeds in the walkway or anywhere they need to be controlled. Hotter days allow the treatment to work more quickly and effectively to eliminate weeds.
Fill a garden pump sprayer with 1 to 2 gallons of white vinegar. The more you fill it, the less pumping you'll need to do to build up pressure in the container to use the sprayer at full force. Don't fill it past the fill line marked on the outside.
Adjust the nozzle on the end of the wand to apply an even spray of vinegar to selected grass and weed areas of the walkway. Most garden sprayers will adjust from a steady stream to a fine spray. Using the spray will cover more weed area.
Spray the vinegar directly onto the weeds, coating the leaves and the stems. Avoid areas where plants, flowers, shrubs or vegetables may be growing. As with most herbicides, white vinegar will kill whatever plant life it comes in contact with.
Find a plastic tarp that is large enough to cover the area of weeds you wish to kill.
Drag the tarp over the area of weeds you wish to kill. Make sure to cover the area completely so that all sunlight is blocked out from the weeds. The tarp will not only kill the weeds that are currently alive, but it will also prevent new weeds from growing by preventing the seeds from receiving sunlight.
Wait several weeks before removing the tarp to ensure that all of the weeds die.
Place a mulching landscape cloth down beneath play areas to keep weeds from taking root beneath them.
Mulch over play areas with 12 inches of wood chips to create a crash space for children. Crash spaces are safety zones beneath playground equipment that cushion falls. They have the added benefit of being so thick that grass and weeds can’t take root in them.
Withhold water in areas where children play. Grass is a very thirsty plant. Lack of water combined with repeated trampling by children as they play will kill many grass and weed plants.
Select an organic herbicide, such as corn meal gluten, to spread around the play area. Corn meal gluten will not harm children and keeps seeds from grass and weeds from germinating.
Pour vinegar into a squirt bottle and spot-treat weeds by spraying them where you see them. The active ingredient in vinegar is acetic acid, which will poison weeds without harming children.
Improving Lawn Health
Aerate the soil to deter weed growth. Weeds flourish in dense, compacted soil. Aeration can be accomplished by using a lawn aerator. Walking your lawn while wearing spiked shoes will work for a small yard.
Mow the grass often. Leave the grass about 2 1/2 inches tall to provide shade, which will inhibit weed growth. Keeping the yard mowed prevents weeds from developing seed heads. Rake up grass clippings if they contain any weed seed.
Combine 1 cup liquid dish soap and 1 cup ammonia in a 20 gallon hose-end sprayer and spray your yard thoroughly every two to three weeks. This soap bath will improve the health of your lawn. Clean grass blades will allow fertilizers and herbicides to penetrate the grass without interference from dust and oils.
Fertilize the yard to obtain a lush, healthy lawn. Thick grass creates a less desirable environment for weeds to grow in.
Use a long screwdriver or knife to dig deeply around the base of each weed. Pull the weed from the soil. Discard weeds to prevent reseeding.
Spray each weed with a commercially prepared organic herbicide that is safe for lawns. An alternative organic solution is to mix 1 gallon apple cider vinegar with 1 tablespoon liquid dish soap. Spray this directly on each weed.
As an alternative to an organic herbicide, a commercially prepared broadleaf weed killer can be applied, following the manufacturer's directions.
Dress appropriately. Whenever you handle an herbicide you must be completely clothed to protect your skin. It is also a good idea to wear a set of goggles and a mask.
Weigh and place Sahara Grass Killer granules in your garden sprayer.
Add your gallon of water to the garden sprayer.
Mix the two ingredients with a wooden stick, similar to one used for mixing paint.
Set the lid on the garden sprayer and spray across the area of lawn you want to treat. This solution will over 450 sq. ft. You can double the ingredients if you need to cover 900 sq. ft.
Weeding keeps weeds from robbing valuable nutrients from the soil and competing with desired flowers, vegetables, herbs and shrubs. Weeds can also shelter harmful insects and diseases.
Because weeds grow quickly, weeding should be done regularly to keep them under control. Like flowers, different weeds have different life spans. Annual weeds are the easiest to control.
To be most effective, weeding should be done before seeds are set. Weed seeds can be dispersed by several means, spreading weeds to large areas.
Weeding should be done by hand or with a simple gardening tool such as a hoe or trowel. Rototillers and other deep-tilling tools destroy soil structure, drainage, worms and micro-organisms in the soil. (Reference 2).
Weeding too deeply can cause dormant weed seeds to germinate and begin to sprout.
Trim tall weeds with a weed-clearing tool or any appropriate gardening tool. Any plants that are too thick can be stomped down.
Leave the clippings where they fall. They are a great source of nitrogen for your soil.
Lay down the newspaper or cardboard where you want to be weed-free.
Water the newspaper or cardboard with the hose. Be sure that the cardboard is completely saturated. The weeds will be cut off from the air and sun they need to survive. The nitrogen from the living plant matter combined with the carbon of the newspaper or cardboard will act as compost for the soil.
Keep the newspaper or cardboard damp by watering it every or every other day. In addition, try to occasionally walk or stomp over the newspaper or cardboard to help thwart any aggressive weeds and to ensure that all plant matter is close to the ground for decomposition.
Wait at least two weeks for plant matter to begin to break down before you cut through the newspaper or cardboard to plant any new plants in the space. As time passes and the plants begin to decompose, earthworms will be attracted to the moist soil just beneath the cardboard. The worms will tunnel through and aerate the soil.
Kill any residual weeds and weed seeds in the vineyard before planting grape seeds by watering the weeds and placing clear plastic over the soil. This process, known as solarization, will literally cook the weeds.
Uproot grass and weeds by cultivating the soil every 2 to 3 weeks. Work a rototiller over the spaces between the rows where grass may grow. Install shallow tines on the rototiller so as not to disturb the roots.
Mulch smaller vineyards by spreading a layer of sawdust, well-rotted manure, hay or shredded newspaper with a pitchfork to keep weeds under control. Mulch prevents weeds by blocking sunlight to the soil and prevents weed seeds from sprouting.
Put on a long-sleeved shirt, long pants, chemical-resistant gloves, goggles and a face mask. This is necessary to protect you from eye damage, skin irritation and respiratory distress that could occur if the chemical comes in contact with your body.
Pour 13 oz. of glyphosate into a backpack sprayer.
Add 1 gallon of water to the glyphosate in the backpack sprayer.
Put the lid on the backpack sprayer, and shake the sprayer to combine the two ingredients. You now have enough glyphosate to cover 400 square feet. If you need to cover a bigger space, multiply the ingredients.
Aim the backpack sprayer at the leaves of the weeds you want to kill. The chemical is absorbed through the leaves, not through the roots. Spray until all of the weeds are soaked.
Wear garden gloves when working with weeds. Pull young weeds from the base, gently and slowly tugging to avoid breaking the stems. If you pull correctly, you will pull out the whole root, eliminating the weed. Pulling weeds is only effective if you can pull the whole root and stop the weed from dropping new seeds.
Spray herbicide glyphosate onto broken or exposed weed stems. If the weeds are full, trim the heads off to expose the stems, and then treat with glyphosate. The herbicide kills weeds and absorbs into exposed stem or root material more quickly and effectively .
Fill a spray bottle or garden sprayer with boiling hot water. Spray the hot water carefully and precisely into all of the joints in the concrete slab. The boiling water will cook all weeds and most weed seeds, stopping future weed growth.
Repeat application of glyphosate or boiling water as needed if more weeds appear. You can also treat the slabs with either water or the chemical every two to three weeks to prevent new weeds from starting.
Borax Weed Killer
Fill a bowl with 1/2 cup warm water. Add 10 oz. borax powder to the water and stir until the borax is completely dissolved.
Dilute this mixture into a large bucket with 2 1/2 gallons of water. Transfer the mixture to empty spray bottles or a garden sprayer. For smaller areas, cut the recipe in half.
Spray the mixture onto the weeds you want to get rid of.
Vinegar and Salt Weed Killer
Fill a bucket with 1 gallon white vinegar. Add 1 cup table salt and 1 tbsp. liquid dish soap to the bucket.
Stir the ingredients with a long-stemmed spoon to thoroughly combine. Transfer the mixture into clean, empty spray bottles.
Spray the mixture directly onto the weeds. Store the excess solution in labeled spray bottles.
Boiling Water Weed Killer
Fill a large pot with water. The amount of water and size of the pot will depend on the size of the weeded area you want to get rid of. Make sure there is ample water to completely saturate the weeds.
Place the pot on the stove. Bring the water to a boil.
Carry the boiling water to the yard where the weeds are located. Use hot pads to carry the pot and be careful not to spill the water on yourself.
Dump the boiling water onto the weeds. The hot water will essentially cook the weeds to death.
Lemon Juice and Vinegar Weed Killer
Pour 4 oz. lemon juice into a 1-qt. spray bottle. Fill the bottle the rest of the way with white vinegar.
Shake the bottle a few times to thoroughly combine the ingredients.
Spray the mixture onto troublesome weeds. For larger weeds, more than one application may be required.
Combine one part vinegar, eight parts water, and one part gin in a 20-gallon spray bottle.
Pressurize the spray bottle by pumping its air intake lever.
Spray down the entire area with the mixture, applying heavier amounts directly onto weeds' root systems.
Re-apply monthly to keep the soil at an acidic level that is hostile to weeds.
Pull weeds as soon as you see them. Pull firmly at the base of the weed to pull it up along with the roots. Pull as many of the weeds as you can, since this is the most effective weed control method -- and it is an instant fix.
Rake the area under your tree to remove stones, sticks and yard debris.
Lay a single layer of newspaper over the entire weed-infested area around the tree.
Pour mulch or gravel over the newspaper to weigh it down and cover the unsightly look of the newspaper. Leave the newspaper in place, as it will break down into the soil and prevent weeds from growing in the area by acting as a block to the ground surface.
Measure the surface of the garden or farm plot to determine the dimensions of your weed block. The surface you may wish to cover can include the whole plot, or simply the rows where your mower or tiller cannot reach.
Cut the plastic weed block to fit over the top of the soil area.
Cut holes in the plastic weed block to make it easier to slip the plastic around the plants.
Lay the plastic weed block on the ground around the plants.
Anchor the weed block in place around the plants with plastic anchors.
Pull weeds up by hand as you see them crop up. This is the most effective way to kill weeds without harming flowers.
Spread mulch several inches thick around the flowers. The thick material blocks the light and keeps the weeds and grass from being able to grow. Move it around the flowers with you hands to work it into all the crevices.
Spray the weed or grass, and nothing else, with full strength vinegar. Fill a spray bottle with vinegar and set it to a "stream" setting so that you can do pinpoint applications.
Lay down a plastic cover under the flower bed if you haven't planted flowers yet. The plastic cover will block air and light and kill the grass and weeds.
According to the Ontario Ministry of Agriculture, Food and Rural Affairs, crop rotation is an important strategy in developing a long-term weed control program. Weeds like to grow in crops that have similar growth characteristics to their own. Growing the same crop in the same area every year causes weed species to build up in the dirt and take over. Switching crops every year prevents this.
Fast Growing Plants
Fast growing plants germinate quickly, growing so fast that they choke out competition from weeds. Leaves from fast growing crops such as beans, squash, pumpkin and cucumbers shades the ground where weeds will grow, choking off the sunlight they need to survive.
Seed Bed Preperation
To effectively prevent weeds says the University of Maryland, proper seed bed preparation is essential. Tilling the soil with a spade or rototiller before planting breaks up weed roots and displaces germinating weed seeds. Leaving the surface of the seed bed rather rough after tillage also prevents the growth of weeds.
Adding mulches to the seedbed accomplishes the same thing as fast growing crops. Spreading a thin layer of mulches such as straw, grass clippings or paper will reduce the sunlight that reaches maturing weed plants.
Regularly mow your grass down by 1/3 of the grass blade at a time. This encourages thick grass growth, which chokes off sunlight and resources for weeds in the lawn. Mowing regularly also cuts weeds before they are able to release seed and propagate.
Apply a pre-emergent herbicide to the lawn two to three weeks before the weeds begin to seed. For most weeds, this is between May 5th and May 20th. Pre-emergent herbicides kill the seeds before they are able to germinate.
Apply a post-emergent herbicide to the lawn to kill weeds once they are grown. Liquid sprays work better than powder, as post-emergents require absorption through the leaves of the plant. Apply post-emergents in the early fall between August and October or in the spring between May and June.
Boiling water will kill weeds in small areas. This method is best for controlling weeds in driveways, sidewalk cracks and edges. This is probably the cheapest way to kill weeds that are isolated from other plants. Sometimes people add one pound of salt to one gallon of hot water to kill weeds. However, this recipe should not be used to kill weeds that are near other plants. Salt can build up in the soil and make it infertile.
A mixture of vinegar and lemon juice will kill weeds. This mixture should be made for a spray bottle using 1/4 cup of lemon juice for every 1 cup of vinegar. The best way to apply this weed killer is by spraying it onto the targeted weed in sunlight. Application of this weed control solution may have to be repeated. This mixture is biodegradable and will kill common weeds such as chickweed, ragweed, crab grass and wild carrot.
Solar Weed Control
If you are trying to kill weeds in a single area and you are not in a hurry, you can use the power of the sun to kill the weeds. Sealing the area with clear plastic will raise the temperature under the plastic and kill any weeds. In addition, the soil temperature can be up to 100 degrees 18 inches below the surface.
Dandelions, plaintain, purslane, clover and thistle are just some of the many broadleaf weeds that can take over the lawn. Treat these weeds using selective post-emergence herbicides. Apply them in early fall to control perennial and winter-germinating annual broadleaf weeds and in spring to control spring-germinating annual broadleaf weeds. The best results are obtained when post-emergent herbicides are applied when the soil is moist and the weeds are young and in active growth.
Annual Grass Weeds
Annual grass-like weeds such as annual bluegrass, crabgrass and foxtail are best controlled using a pre-emergent herbicide. It should be applied to the lawn at least two to three weeks before the annual grass weeds are likely to germinate, usually in mid spring. Do not use pre-emergent herbicides on newly seeded lawn as it will also kill the desired grass seed.
Perennial Grass Weeds
Quackgrass, tall fescue and creeping bentgrass are all perennial grass-like weeds that can be controlled only with a non-selective herbicide, which means it will kill all vegetation it comes in contact with. Spot treat individual weeds when they are in active growth and take care not to let the herbicide come in contact with your turf grass.
Pour your distilled vinegar into an empty spray bottle.
Add the lemon juice and screw on the spray bottle's lid. Give the two ingredients a shake to mix them together. Make sure you don't have any seeds in the mixture if you used fresh lemons to make the lemon juice.
Spray this homemade weed killer directly on the weeds you want to kill. Make sure it is not going to rain the day you use it. You should also apply the homemade weed killer on a day when the wind is mild. If the weed killer is blown onto another plant, it will kill it.
Repeat five to seven days later if there are any remaining weeds.