Plan the perfect garden with our interactive tool →

What Is Punk Wood?

Firewood
Lovcen/iStock/Getty Images

Punk or punky wood is a soft, rotted area, usually in the center of a tree or log. This condition is usually caused by fungal infection, and may not be easy to identify from the outside. Punky wood can interfere with woodworking projects such as turning. However, punky wood is not always a problem. It works well as a fire starting material, especially when camping or in other situations where paper and other tinder are not readily available.

Fire Starting

Fires start best when the initial spark or flame can catch in a soft, dry material containing many air spaces. Punky wood that has rotted until it feels spongy, then dried, works well to get a fire going. The wood can be crumbled from a rotten branch for immediate use, but, according to Green Earth Survival School, it works best when it has been cooked over a fire in an enclosed space. The resulting lightweight charcoal ignites easily and takes up less space than other forms of tinder.

Woodworking

Punky wood lacks the strength and structural stability of the surrounding material, but may not show up in woodworking until the project is already well under way. This is a particularly common problem in wood turning, where the working process exposes large portions of concealed material. Some punky wood has rotted incompletely, and can be left in place, as long as it does not need to provide structural support. Other punky wood is extremely soft and will ruin the piece.

Stabilizing Punky Wood

Porous, soft areas of lumber can sometimes be stabilized using cyanoacrylate glue, epoxy sealer or commercial wood hardeners. These substances form a bond with the rotted wood, creating a composite material that retains the look of wood, but is much harder. Apply stabilizers only to dry, slightly warm pieces and in a well-ventilated area. Wood stabilizers tend to leave the damaged area with a slightly glossy finish, and must be sanded to match the rest of the wood. They work best when the entire piece will be finished using a gloss product, such as lacquer or polyurethane. Even after stabilization, punky wood remains weaker than the surrounding material and will not work as a structural element.

Considerations

The term “punky wood” can refer not only to a soft, rotted area of a tree, but also to wood that has become too dry through overseasoning. While dry wood burns best, overdry wood actually burns inefficiently, releasing most of its burnable material as smoke. This reduces the heat value of the wood and increases the risk of creosote buildup. Wood must have around 20 to 25 percent moisture to burn well in an airtight modern stove, according to The Chimney Sweep and the US Department of Energy .

Related Articles

List of Drying Times for Firewood
List of Drying Times for Firewood
The Best Wood for Outdoor Projects
The Best Wood for Outdoor Projects
Are Weeping Willow Trees Good Firewood?
Are Weeping Willow Trees Good Firewood?
Types of Wood Not to Burn in a Fireplace
Types of Wood Not to Burn in a Fireplace
What Is Yew Wood?
What Is Yew Wood?
What Is Ovangkol Wood?
What Is Ovangkol Wood?
How to Replace a Masonite Door Glass Panel
How to Replace a Masonite Door Glass Panel
How to Fix Rotten Raised Beds
How to Fix Rotten Raised Beds
How to Fill Knot Holes in Fences
How to Fill Knot Holes in Fences
How to Finish Wood With Mineral Oil
How to Finish Wood With Mineral Oil
What Is Okoume Wood?
What Is Okoume Wood?
Trunk Rot in a Birch Tree
Trunk Rot in a Birch Tree
Dawn Redwood Lumber Uses
Dawn Redwood Lumber Uses
How Long Does Hickory Firewood Need to Season?
How Long Does Hickory Firewood Need to Season?
Cypress Tree Uses
Cypress Tree Uses
How to Dry Birch Wood
How to Dry Birch Wood
Polonia Tree Firewood Facts
Polonia Tree Firewood Facts
Deborah Maple Tree Diseases
Deborah Maple Tree Diseases
Is Spruce a Hard or Soft Wood?
Is Spruce a Hard or Soft Wood?
Garden Guides
×