Using a tractor with a single-bottom plow requires you to adjust three components of the tractor in order to place the single bottom in proper plowing position. You have to make certain that the plowing sheer is level when the plow is at the proper depth in the ground. You also have to ensure that the lift arms are level or tilted down. The last adjustment you will make is the depth your ditch or diversion requires.
Adjust the top link by hand so that the plow sheer runs level when it is at the proper depth in the ground. To manage this, the plow sheer must be tilted slightly down when it is sitting on the surface of the ground. If you place the sheer at level while it is on the surface, it will simply drag behind you and not dig into the ground. If you have the sheer at too great an angle, once the plow digs into the ground, it will jump and lurch. The key is to have the plow sheer at level when the plow is at the desired depth.
Adjust the side link so that when the plow is at depth, the lift arms are level or tilted slightly down. If the lift arms are angled up, they will pull the plow out of the ground and you will have valleys and crests in your trench.
Find an appropriate test area before you begin trenching. Drop the plow to level as you pull it behind your tractor. Look at the plow sheer and lift arms and check the consistency of your trench. If you are not happy with the trench, make further adjustments to the lift arms and the sheer angle. If you are satisfied with the position of your plow, you are ready to begin trenching.
Things You Will Need
- Crescent wrench
- Prepare the Ground for Prefab Concrete Steps
- Use a Front Tine Rototiller
- Sharpen a Garden Hoe
- Make a Drag for Leveling Gravel
- Chainsaw Sharpening Degrees
- What Are Characteristics of Unbalanced Force?
- Building Instructions for Wheelchair Porch Lifts
- Secure an Outdoor Bench to Concrete
- Spread Road Base
- Terrace With Railroad Ties
- Level a Lawn Mower Deck
- Build Railroad Tie Steps