So, I'm going to take a little bit of a wood glue, add it to my line where the wood is going to sit. I'm going to switch over to the Phillips head bit, insert my screw by hand as much as I can, hold it in place and very gently, easily put it in. That's as far as I have to go now. Now it's just the matter of lining it up, switching again. If you want to be a rich guy about it you could always have two screw guns. So again I'm going to hold it in place. Notice how it's leaving that open area larger hole at the top to except the top of the screw. Switch over again and very gently lock it in. Very nice there we go, now we only have to do that seven more times. Piece of cake!