Hi. My name is Matthew Christian, from Tampa, Florida and on behalf of Expert Village, today I'd like to talk to you about the use and maintenance of a pressure washer. Most pressure washers typically have two water connections: We have a water in and a water out. A standard garden hose screws on to the water inlet. Some pressure washers, this one is missing, have a screen built into the inlet to prevent miscellaneous debris from getting into the pump and possibly damaging it. On this one the filter is missing. But this is where you'll screw on your supply line. On the other line, this quick disconnect fitting is where the output goes; the high-pressure side where you'll hook up your wand assembly and hose. This is where the high-pressure water comes out.