Hi! Welcome back to Expert Village and my name is Charlie Folkman and today we are going to continue building our gazebo. Now remember that the lattice work we are going to have on the roof is going to be the same exact dimensions as our base here. So it is actually a good idea to go ahead and cut your lattice now by using the diagram that we already have. So as we talked about earlier, the lattice is going to start with the 2, 4 by 4 eight sheets and we are going to do the same exact steps we did to make our 6 foot by 6 foot sheet of plywood to make our octagon. You can go ahead and use this as our template for your lattice. Okay so now we have the lattice work for our roof. I want to make one point that we are not going to connect these in the middle because they will be screwed in on the sides.