Hi! This is Jon on behalf of Expert Village. In this video clip, we will be replacing our air filter. Before we replace our air filter, we want to take a close look at some of our intake ports here for our air into our carburetor. You want to make sure there is no buildup, no excessive debris or dust. If there is, you want to make sure to clean that out. To install our air filter, we are going to want to take our air filter housing and place our air filter back inside of it. Now at this point, you want to make sure that you get the hole in your air filter to line up with your intake hole and we are going to slip that on at an angle and rotate that back into the correct position until it snaps into place. You might also want to come back and shake it a little bit just to make sure it is in fact securely on there.