Plan the perfect garden with our interactive tool →

How to Reverse a 3-Phase Motor

...
Big electric motor in a marble quarry. Alentejo, Portugal image by mrfotos_fotolia from Fotolia.com

Three-phase motors rely on a polyphase system for delivering continuous alternating current. Instead of the single power lead used in single-phase electrical systems, three-phase systems use three power leads. Each power lead is a phased 120 degrees apart from the other two leads, making them perfectly balanced. When each phase of the three-phase system is connected to its proper terminal in the three-phase motor, the motor runs forward, as it was designed. However, if so desired, the motor can be reversed by switching the order of the phases.

Shut the breaker off that supplies power to the three-phase motor, then lock the breaker with a padlock to prevent the breaker from being turned on while you are working on the motor.

Unscrew and remove the cover of the motor using a flathead screwdriver, and determinate two of the three phases using a flathead screwdriver. It doesn’t matter which two phases are removed: T1, T2 or T3.

  • Three-phase motors rely on a polyphase system for delivering continuous alternating current.
  • Each power lead is a phased 120 degrees apart from the other two leads, making them perfectly balanced.

Swap the two phases and refasten them using a flathead screwdriver. Reinstall the cover.

Restore the power. The motor now runs in reverse because two of the phases have been swapped.

Troubleshoot A 3-phase Electric Motor

Three-phase motors are normally used in commercial-type operations. These motors have fewer parts and are more sturdily built than their single-phase counterparts. Take input voltage to the motor using the volt ohmmeter. The motor-specified voltage must be present on all three phases. Examine the motor's electrical connections and terminals. Remove power to the motor and repair any damaged or loose connections. Remove motor voltage and disengage the motor from the machine that it is running. If it does, check the machine for serviceability. Replace motor if it will not restart.

  • Swap the two phases and refasten them using a flathead screwdriver.
  • Take input voltage to the motor using the volt ohmmeter.

Related Articles

How to Disable the Seat Safety Switch on a Craftsman Mower
How to Disable the Seat Safety Switch on a Craftsman...
How to Change the Magneto on a Briggs & Stratton
How to Change the Magneto on a Briggs & Stratton
How a Governor on a Briggs & Stratton Engine Works
How a Governor on a Briggs & Stratton Engine Works
How to Wire a Briggs & Stratton Alternator
How to Wire a Briggs & Stratton Alternator
Troubleshooting & Repair of Audio Cassette Players
Troubleshooting & Repair of Audio Cassette Players
The Starter Relay and Why a Mower Won't Start
The Starter Relay and Why a Mower Won't Start
How Many Volts Should Be in Riding Lawn Mower Batteries to Be Considered Good?
How Many Volts Should Be in Riding Lawn Mower Batteries...
Facts on Electrical Outlets
Facts on Electrical Outlets
Honda Rancher Winch Install
Honda Rancher Winch Install
How to Wire Lights on a Tractor
How to Wire Lights on a Tractor
How to Adjust a Carburetor on a Ryobi Grass Trimmer
How to Adjust a Carburetor on a Ryobi Grass Trimmer
The Disadvantages of Rotating Biological Contactors
The Disadvantages of Rotating Biological Contactors
How to Replace a Transmission Belt on a Lawn Tractor
How to Replace a Transmission Belt on a Lawn Tractor
Garden Guides
×