If you're a scout or have gone to sleepover camp, chances are you're familiar with lanyard--also called gimp, boondoggle or scoubidous. Learn one of the most basic of lanyard stitches--the box stitch. You can use this stitch to create a basic lanyard bracelet or you can combine it with other stitches to form a completely different type of bracelet.
Cross the two strands of lanyard at their centers and place them on a flat surface. Call the strands "Strand A" and "Strand B."
Curl one side of Strand A over Strand B to form a loop. Then, curl the other side of Strand A over Strand B in the opposite direction to form another loop. Hold these two loops in place with your less dominant hand.
Hold one side of Strand B in your dominant hand. Weave it over the loop closest to it and under the loop farthest from it. Then do the same thing, in the opposite direction, with the other side of Strand B.
Take two adjacent strands in each hand and pull to tighten the box stitch.
Repeat Steps 2 to 4 to add more box stitches to the bracelet. Continue until the woven bracelet is a bit longer than the circumference of your wrist.
To finish the bracelet, repeat Steps 2 to 3 one more time, leaving the stitch loose. Then, one at a time, pull each strand around the loop to its left and up through the middle of the loose stitch. When all of the strands are coming out of the center, pull them to tighten the last stitch.
Cut off the remaining ends of the lanyard.