How to Mount Wood Fence Panels Between Posts


A common method of constructing or repairing a wood fence involves the attachment of a series of interconnected boards called "panels" to wooden posts protruding from the ground. Panels can be built from raw materials or bought as prefabricated units. Properly mounting fence panels to posts is essential to the proper function of your fence.

Step 1

Buy or build the appropriate number of fence panels. To determine how many panels you need, count the number of fence posts you have and subtract one. Calculate the correct length of the panels by measuring from the center of one post to the center of an adjoining post. The height of your fence will vary according to your taste, the fence's intended use, and local ordinances.

Step 2

Position each fence panel so that its edges reach the center of each post to which the panel will be attached. Because fence panels are often large and very heavy, you will need the help of at least one other person to steady the panels as you position them and attach them to the posts. Always attach a fence panel to a post with the panel's support beams facing your property. You can identify the support beams as the two or three boards running horizontally across the length of one side of the panel. Place a level along the top rail or support beam to ensure that the panel is straight.

Step 3

Attach the panel to the posts. Drive two or three stainless screws or heavy duty nails through each side of the top and bottom support beams and into the post at 30 to 45 degree angles. You can also mount the panels by attaching angle brackets the support beams and the post. Angle brackets are angled metal pieces with holes allowing the user to connect two items with screws, nails or bolts. You can buy angle brackets at any hardware store.

Step 4

Use a cleat to connect two fence panels in an area where there is no post. A cleat is a board or joist that joins two fence panels at the support beams. A cleat should be about three feet long and have the same width and depth as your panel's support beams. Position the center of each cleat at the point at which the two fence panels meet. Place one cleat directly below the top support beam and one cleat directly above the bottom support beam. Attach the cleats to the support beams with stainless screws or heavy duty nails.

Tips and Warnings

  • Cleats are generally not effective for more than two successive panels. Install a new post in an open area requiring three or more fence panels. Be sure that another person steadies a fence panel as you attach it to a post. A falling fence panel can result in serious injury.


  • "How to Build & Repair Fences & Gates;" Rick Kubik; 2007.
Keywords: fence, wood fence, fence panel, attach

About this Author

Mike Andrew has written business and legal articles for "850 Magazine" since 2008 and covers college football for several websites. Andrew is a freelance writer, attorney and music producer based in Florida. He received his Juris Doctor from Florida State University.

Article provided by eHow Home & Garden | How to Mount Wood Fence Panels Between Posts